Additional ports can be helpful if you're setting up a plugin like Votifier or Dynmap that requires a port to be open!

This feature is rolling out node-by-node, if you see the alert pictured below then please follow this guide. If you do not see the alert on the top of your server page then you can use any port between 8000 and 8200 Alert

How to add a port...

Go to the Additional Ports menu, by clicking either of the boxed options on your server's Multicraft page How to get to additional ports

Click Add Port on the left Add Port

The table will show your new port number, in this example my port would be 8105 Port 8105

You can repeat this in order to get a maximum of 3 additional ports

Configure your plugin to use the port number in it's config file. If the plugin asks for an IP address to bind to, this would be 0.0.0.0. Then, the port will be accessible through your server's IP, for example if your server IP is 12.34.56.78:25578 then you will be able to access a plugin running on port 8105 through 12.34.56.78:8105
Was this article helpful?
Cancel
Thank you!